Z-purge control system is Factory Mutual Approved for Division 2 environments. Z-purge designed with built-in vent value with spark arrestor and built-in flow meter and pressure gauge for easy setup and operations on customer supplied enclosure.
Division 2, Z-Purge Control
Unit of Measure
Standard Features and Benefits
|
Materials
|
Physical Dimension
|
Environmental
|
Electrical
|
Pressure and Air Requirements
|
Options
|
Additional Information
|
Manuals
Materials
Enclosure |
N/A
|
Design |
N/A NEMA 4 or 4X Flush Mount or Extended Mount with Interface Box |
Physical Dimension
Dimensional Drawing |
N/A
Dimensional Drawing |
Outer Box Height |
N/A 6.75 in |
Outer Box Width |
N/A 11.50 in |
Outer Box Depth |
N/A 2.75 in |
Outer Box Weight |
N/A 9 lb |
Interface Box Height |
N/A 7.25 in |
Interface Box Width |
N/A 12.25 in |
Interface Box Depth |
N/A 3.50 in |
Interface Box Weight |
N/A 5 lb |
Environmental
Non-Condensing Relative Humidity |
N/A 10 to 100 % |
Operating Temperature |
N/A 0 to 50 ºC32 to 122 ºF |
Storage Temperature |
N/A 0 to 70 ºC32 to 158 ºF |
Electrical
Maximum Power Usage |
N/A 5 W |
Maximum Switching Alternating Current (AC) Voltage Capacity |
N/A 120 V240 V |
Maximum Switching Direct Current (DC) Voltage Capacity |
N/A 30 V |
Switching Current Capacity |
N/A 3 A |
Note for Electrical |
N/A FCC Class A computing device |
Pressure and Air Requirements
Incoming Air Pressure (Customer Air Input) |
N/A 20 to 100 psi |
Purging Supply |
N/A 150 scfh |
Operating Supply |
N/A 35 scfh |
Operating Pressure |
N/A 1 inWc |
Options
Options |
N/A
Class I & II, Division 2, Group A,B,C,D, F & G FM Approved Purge Control (Z-Purge), Stand-Alone, Includes Interface Box. |
Accessories |
N/A 9026 - Conduit Seal Kit 9047 - Air Connection Kit |